Showing thought for the end-user in the design phase, all of the touchpads can be accessed
using the thumb of the hand holding the detector many detectors require two-hand
adjustments which can be cumbersome at times and its nice to see that the 6T is an exception
to this. The touchpads include ON/OFF, TONE ID, SENS(itivity), TRAC LOCK, BEACH,
PP/ALLMETAL, and DISC(riminate) that provide the following functions:
ON/OFF: This serves a dual function it turns the detector on and, if held, it activates a very
useful backlight ideal for hunting in low or no light conditions such as beaches after the
crowds leave.
TONE ID: If you are in the motion discriminate mode, this touchpad allows you to activate an
additional target ID circuit where each of the nine distinct groups of targets shown above the
LCD produce a different tone enabling you to identify targets based on their audio response.
If you prefer a single tone from all accepted targets, simply toggle this off. In the All Metal
mode, selecting the Tone ID activates or deactivates a Voltage Controller Oscillator (VCO)
audio circuit.
When active, the pitch and volume increase as the coil gets closer to the target which helps
pinpoint and separate targets in close proximity to one another.
SENS(itivity): As the name implies, this adjusts the sensitivity to metal objects as well as
outside electrical interference and ground mineralization. Setting it as high as possible without
the 6T becoming unstable will result in maximum detection depth. There are eight distinct
settings which are shown on the right side of the screen.
TRAC LOCK: The 6T features a fully automatic ground balancing system which will
continually monitor ground conditions and make any adjustments that might be called for. If
you find yourself in ground where mineralization changes frequently, or contains traces of
rusted iron, activating the TRAC LOCK function will prevent the 6T from trying to
continually adjust to match the ground can improve overall stability.
BEACH: If you hunt saltwater beaches or areas with high alkali content, such as the deserts of
the southwest, activating the BEACH circuit changes the range of the ground balance and
tracking circuits to better handle these conditions. Simply press the touchpad, allow the 6T to
track the ground and start huntingwhat could be easier!
PP/ALL METAL: Pressing and releasing the touchpad will toggle from the motion
discriminate to the non-motion All Metal search modes. Pressing and holding it will activate
the pinpoint mode and, in this mode, the display will change to indicate the target depth in 1
increments from 0 to 12.
NOTE: the 6T actually has two depth indications the small one on the left side of the screen
reads out continuously when a target is detected and indicates in 2 increments from 0 to 10+.
In pinpoint, you get the larger indication in the center of the screen.
DISC(riminate): The 6T has nine separate groups of targets which are shown as icons above
the screen. Incorporating the notch discrimination concept, users decide how to handle any of
the groups simply by pressing the upper half of this touchpad to scroll through the groups and
then accept or reject them using the lower part of the touchpad.
(5 stránky)
(58 stránky)
(7 stránky)
(13 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce